Processes
- OD / ID turning
- Facing & profiling
- Grooving & parting
- External & internal threading (metric/imperial, UN/ISO/NPT)
- Boring & reaming
- Knurling
- Live tooling (drill/mill features in one setup)
CNC Turning
High-accuracy turning with live tooling for mill-turn parts. Consistent quality for shafts, bushings, spacers, fittings, housings, and more—built in Mexico, delivered to the U.S.
Work Envelope
Ø up to 300 mm × 500 mm L
Typical Tolerance
± 0.0005"
Lead Time
As fast as 48 hr (rush)
Materials
- Aluminum 6061-T6, 7075-T6
- Stainless 304 / 316L / 17-4 PH
- Carbon steel 1018, 1045, 4140
- Brass, Copper
- Plastics: Delrin (POM), Nylon, ABS, PEEK
Surface Finish
- As-turned: Ra 3.2–1.6 μm typical
- Fine finishing: ≤ Ra 0.8 μm (feature-dependent)
- Deburr & edge break included
Maximum Part Size
Standard envelope up to Ø300 mm × 500 mm length. Larger parts on request depending on material and feature set.
Tolerances & GD&T
- Dimensional: ±0.0005″ typical on critical diameters
- Concentricity & runout per drawing (specify datums)
- Surface callouts for sealing/bearing fits (Ra, Rz)
Design Tips (DFM)
- Add relief grooves for full-form threads when possible.
- Prefer standard chamfers/radii; call out sharp corners only when required.
- For mill-turn features, keep tool access clear (min 3 mm end-mill).
- Specify press-fit / slip-fit classes if applicable (e.g., H7/g6).
Quality & Inspection
- In-process gauging & calibrated micrometers/bore gauges
- First-article inspection (FAI) on request
- Dimensional reports for critical features
Secondary Ops & Finishes
- Anodize (Type II/III), passivation (SS), black oxide (steel)
- Heat treatment (normalize, Q&T) for steels like 4140
- Engraving/marking (ID, lot, orientation)